---
updatedAt: 2026-10-08T13:17:48.000Z
agentTools:
  siteIndex: https://docs.jfrog.com/llms.txt
  projectIndex: https://docs.jfrog.com/artifactory/llms.txt
---

# View Repositories

View configured Artifactory repositories and filter or act on them in the Repositories table.

Use the Repositories table in JFrog Artifactory to see the repositories configured on your system, including last activity and project assignment, and to run repository actions or filter the list. 

<Image src="https://files.readme.io/8127791069f05f64ab365e8842686551cae8e8690b363c2019004d41d3d6de16-all_repositories.png" alt="View_all_repos.png" border={true} />

## View Configured Repositories

The Repositories table shows all the repositories on your system with relevant data. The Last Activity column indicates the most recent time when artifacts were either uploaded to or downloaded from the repository. The Project column indicates to which project the repository is assigned, and if it's shared by other projects.

**To view the repositories currently configured on your system:**

* Click **Administration** > **Repositories**. The Repositories table is displayed, showing all the repositories on your system with relevant data.

## Recently Viewed Repositories

A repository is considered recently viewed based on when it was created or when it was last viewed in editing mode, even if no changes were made to its configuration.

**To view recently viewed repositories:**

* Click the **Recently Viewed** tile on the Repositories page to view the 20 most recently viewed repositories.

## Inactive Repositories

The criteria for displaying inactive repositories are:

* **For local repositories:** Repositories where **Disable Artifact Resolutions in Repository** is true.
* **For remote repositories:** Repositories that are offline.
* **For federated repositories:** Federated repositories are in an un-synced configuration, and as a result the federation sync is paused.

## Shared Repositories

Open the **Shared Repositories** view to see repositories that you shared with other projects, or repositories in other projects that are shared with you. The Shared Repositories view also provides a quick look at the permissions for each shared repository, and whether any internal remote repositories are connected. For more information, see [Share Repositories Across Multiple Projects](/projects/docs/share-repositories-across-multiple-projects).

<Image src="https://files.readme.io/9bb4236bd7e5ceb5d6e5a5c194e9cb3de8fde19c86da913421bff9c4fae502c8-shared_repos.png" border={true} />

The Shared Repositories view provides the following information about each shared repository.

<Table>
  <thead>
    <tr>
      <th>
        Column
      </th>

      <th>
        Value
      </th>

      <th>
        Explanation
      </th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>
        Sharing Date
      </td>

      <td>
        Timestamp
      </td>

      <td>
        The time and date when the sharing permissions for the repository were last updated.
      </td>
    </tr>

    <tr>
      <td>
        Sharing Permissions
      </td>

      <td>
        Read and Write or Read Only
      </td>

      <td>
        The permissions granted for the shared repository. For more information, see [Sharing Permissions](/projects/docs/share-repositories-across-multiple-projects#sharing-permissions).
      </td>
    </tr>

    <tr>
      <td>
        Internal Remote Repository Status
      </td>

      <td>
        Pending, Connected, or Not Applicable
      </td>

      <td>
        If the repository was shared directly, **Not Applicable** is displayed.

        If the repository was shared with project-aware download requests enabled, **Pending** means that the shared repository is not yet connected. **Connected** means that there is at least one internal remote repository connected to the shared repository.
      </td>
    </tr>
  </tbody>
</Table>

## Perform Actions on a Repository

You can perform various important actions on a repository in the Repositories table.

**To perform an action on a repository:**

1. Hover over the right end of the repository row and click the 3 dots that appear. A pop-up list of actions appears, as shown below.

   ![actions\_menu\_local\_repo.png](https://files.readme.io/a29edd873f39c4593b60b8f98dfa7f1c64b74aca131a9a7e4e3732cd361cbe4d-uuid-2ee0ceea-93f4-e174-274e-c896d8619c70.png)

2. Choose from one of the following actions:

<Table>
  <thead>
    <tr>
      <th>
        Action
      </th>

      <th>
        Description
      </th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>
        Show in Artifacts Tree
      </td>

      <td>
        Display the repository in the Artifacts Tree.
      </td>
    </tr>

    <tr>
      <td>
        Set Me Up
      </td>

      <td>
        Perform the Set Me Up wizard on the repository. For more information, see [Use Artifactory Set Me Up for Configuring Package Manager Clients](/docs/use-artifactory-set-me-up-for-configuring-package-manager-clients).
      </td>
    </tr>

    <tr>
      <td>
        Recalculate Index (not supported on all repositories)
      </td>

      <td>
        This action recalculates all the indices of the repository. This action isn't supported on all repositories and depends on the repository's package type.

        **Note:** This is a heavy operation and can affect system performance when performed on large repositories.
      </td>
    </tr>

    <tr>
      <td>
        Project Assignment
      </td>

      <td>
        Assign the repository to a project.
      </td>
    </tr>

    <tr>
      <td>
        Project Sharing
      </td>

      <td>
        Share the repository with one or more projects. Sharing a repository with other projects grants those projects read-only or read-and-write permissions to the repository. You can also enable project-aware download requests to track usage and let projects apply custom security policies.
      </td>
    </tr>

    <tr>
      <td>
        Delete
      </td>

      <td>
        Delete the repository.
      </td>
    </tr>

    <tr>
      <td>
        **For Local Repositories only**
      </td>

      <td>

      </td>
    </tr>

    <tr>
      <td>
        Convert to Federated
      </td>

      <td>
        Convert your local repository to a federated repository.
      </td>
    </tr>

    <tr>
      <td>
        **For Virtual Repositories only**
      </td>

      <td>

      </td>
    </tr>

    <tr>
      <td>
        View Aggregated Repositories
      </td>

      <td>
        View repositories that are aggregated by this virtual repository.
      </td>
    </tr>

    <tr>
      <td>
        **For Federated Repositories only**
      </td>

      <td>

      </td>
    </tr>

    <tr>
      <td>
        Push Configuration
      </td>

      <td>
        If two federated repositories are out of synchronization, this action pushes the configuration of the selected repository to the other federated member to re-establish synchronization.
      </td>
    </tr>

    <tr>
      <td>
        Federation Status
      </td>

      <td>
        View the federation status of this repository. For more information, see [View a Selected Repository Federation](/docs/federation-dashboard#view-a-selected-repository-federation).
      </td>
    </tr>

    <tr>
      <td>
        **For Shared Repositories only**
      </td>

      <td>

      </td>
    </tr>

    <tr>
      <td>
        Connect to shared repository
      </td>

      <td>
        For shared repositories whose Internal Remote Repository Status is Pending, connect the repository to the shared source. For more information, see [Project-Aware Download Requests](/projects/docs/share-repositories-across-multiple-projects#project-aware-download-requests). This action is not available from All Projects.
      </td>
    </tr>

    <tr>
      <td>
        View internal remote repositories
      </td>

      <td>
        For shared repositories whose Internal Remote Repository Status is Connected, see which projects and repositories use this shared repository as a source.
      </td>
    </tr>

    <tr>
      <td>
        Create another internal remote repository
      </td>

      <td>
        For shared repositories whose Internal Remote Repository Status is Connected, create another internal remote repository that connects to this repository. For more information, see [Project-Aware Download Requests](/projects/docs/share-repositories-across-multiple-projects#project-aware-download-requests). This action is not available from All Projects.
      </td>
    </tr>
  </tbody>
</Table>

## Filter the Repositories List According to Repository Type, Package Type, and Other Criteria

When you first open the Repositories list, it lists all repositories in the system. You can use the Repositories filter to refine the list and focus on the repositories that you want to work with, based on criteria such as repository type, package, remote repository URL, project, stage, and replication status.

**To filter the Repositories list:**

1. In the Repositories list, ensure that you are in the **All Repositories** view.

2. Click the Filter icon&#x20;

   ![](https://files.readme.io/32d99560e19d0af206c593c6777368433a852815163c5410e26bb3b3549fde10-uuid-a37adbca-064c-86a8-f98d-6d90ac3a3910.png)

   &#x20;in the Repositories table.

   ![filter\_settings.png](https://files.readme.io/f0eec78dc2c2868fd1f11686ba595453ba02bf724ed7ce99a7d337e12c81d1d2-uuid-efd78033-94f2-cca2-eec3-7a76ae1172b2.png)

3. Filter the Repositories list according to the following filter settings.

<Table>
  <thead>
    <tr>
      <th>
        Setting
      </th>

      <th>
        Description
      </th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>
        Repository Type
      </td>

      <td>
        Choose from local, remote, virtual, federated, or any combination of them.
      </td>
    </tr>

    <tr>
      <td>
        Package Type
      </td>

      <td>
        Display repositories of a specific package type supported by JFrog Artifactory, or a combination of package types.
      </td>
    </tr>

    <tr>
      <td>
        URL
      </td>

      <td>
        Display remote repositories according to the repository URL. This setting applies only to remote repositories.
      </td>
    </tr>

    <tr>
      <td>
        Project
      </td>

      <td>
        Display repositories that are assigned to a specific project, shared with a specific project, or both. You can also display all repositories that are unassigned and not shared.

        For more information, see [Share Repositories Across Multiple Projects](/projects/docs/share-repositories-across-multiple-projects).
      </td>
    </tr>

    <tr>
      <td>
        Stage
      </td>

      <td>
        Display repositories according to the repository's assigned stages.
      </td>
    </tr>

    <tr>
      <td>
        Other
      </td>

      <td>
        Select the **Replications** checkbox to display repositories that have a replication. This setting applies only to local and remote repositories.
      </td>
    </tr>
  </tbody>
</Table>

4. To remove the filter settings and return to the All Repositories view, click **Clear All**.

## Frequently Asked Questions

This section provides answers to frequently asked questions.

<Accordion title="FAQs" icon="plus">
  ##### Q: How do I view the repositories configured in Artifactory?

  **A:** Click **Administration** > **Repositories**. The Repositories table lists the repositories on your system with data such as last activity and project assignment. For more information, see [View Configured Repositories](#view-configured-repositories).

  ##### Q: What happens if I recalculate the index on a large repository?

  **A:** Recalculate Index is a heavy operation and can affect system performance when you run it on large repositories. The action isn't supported on all repositories and depends on the repository's package type. For more information, see [Perform Actions on a Repository](#perform-actions-on-a-repository).

  ##### Q: What is the difference between Recently Viewed and Inactive repositories?

  **A:** Recently Viewed shows the 20 repositories you created or last opened in editing mode, even if you made no configuration changes. Inactive uses type-specific criteria, such as disabled artifact resolution for local repositories, offline remote repositories, and unsynced federated repositories. See [View Recently Viewed Repositories](#view-recently-viewed-repositories) and [View Inactive Repositories](#view-inactive-repositories).

  ##### Q: What do I need before I can filter the Repositories list?

  **A:** Open the Repositories list in the **All Repositories** view, then click the Filter icon. You can then refine the list by repository type, package type, remote URL, project, stage, or replication. For more information, see [Filter the Repositories List According to Repository Type, Package Type, and Other Criteria](#filter-the-repositories-list-according-to-repository-type-package-type-and-other-criteria).

  ##### Q: Can I run Set Me Up from the Repositories table?

  **A:** Open the row actions menu and choose Set Me Up to run the Set Me Up wizard on that repository. For more information, see [Use Artifactory Set Me Up for Configuring Package Manager Clients](/docs/use-artifactory-set-me-up-for-configuring-package-manager-clients) and [Perform Actions on a Repository](#perform-actions-on-a-repository).
</Accordion>

## Related Topics

* [Repository Management](/docs/repository-management)
* [Local Repositories](/docs/local-repositories)
* [Remote Repositories](/docs/remote-repositories)
* [Virtual Repositories](/docs/virtual-repositories)
* [Repository Replication](/docs/repository-replication)